Iron Shaft Lineup

Fire Express Spirits IRON SHAFT

Signature Iron Shaft has Renewed!

Well known Quadra series has been renewed. It makes an appearance as Fire Express Spirits Iron Shaft with fancy decoration. It is reasonable but has same quality as “Fire Express Series”.
There are four range of weight between 50g to over 80g to cover variety of golfers and they are designed the Optimum Flex Design by Weight, being the best heaviness each weight to control a trajectory. The flexibility of the Fire Express Spirits Iron Shaft assists the ball much further in a high control.
These are combined shafts with the most appropriate flex to make your customized iron set.
Long iron shafts are also applicable for hybrids.※

※Check if the tip diameter fits the hybrid hosel.

i50

i50

back

Number Length
(mm/inches)
Weight
(g)
Torque
(deg.)
Tip Dia.*
(mm)
Butt Dia.
(mm)
#1 1016 / 40.0 50 4.1 9.40 15.50
#2
#3 991 / 39.0
#4 978 / 38.5
#5 965 / 38.0
#6 953 / 37.5
#7 940 / 37.0 4.0
#8 927 / 36.5
#9 915 / 36.0 3.9
#10 902 / 35.5

MADE IN JAPAN

※Length of parallel tip: 50mm (Note: Tip diameter is measured before coating)

i65

i65

back

Number Length
(mm/inches)
Weight
(g)
Torque
(deg.)
Tip Dia.*
(mm)
Butt Dia.
(mm)
#1 1016 / 40.0 67 3.2 9.40 15.40
#2
#3 991 / 39.0
#4 978 / 38.5
#5 965 / 38.0 3.0
#6 953 / 37.5
#7 940 / 37.0 2.9
#8 927 / 36.5
#9 915 / 36.0 2.5
#10 902 / 35.5

MADE IN JAPAN

※Length of parallel tip: 50mm (Note: Tip diameter is measured before coating)

i75

i75

back

Number Length
(mm/inches)
Weight
(g)
Torque
(deg.)
Tip Dia.*
(mm)
Butt Dia.
(mm)
#1 1016 / 40.0 75 3.1 9.40 15.50
#2
#3 991 / 39.0
#4 978 / 38.5
#5 965 / 38.0
#6 953 / 37.5
#7 940 / 37.0
#8 927 / 36.5
#9 915 / 36.0
#10 902 / 35.5

MADE IN JAPAN

※Length of parallel tip: 50mm (Note: Tip diameter is measured before coating)

i85

i85

back

Number Length
(mm/inches)
Weight
(g)
Torque
(deg.)
Tip Dia.*
(mm)
Butt Dia.
(mm)
#1 1016 / 40.0 83 2.6 9.40 15.30
#2
#3 991 / 39.0
#4 978 / 38.5
#5 965 / 38.0 2.5
#6 953 / 37.5
#7 940 / 37.0 15.20
#8 927 / 36.5 2.4
#9 915 / 36.0 2.3 15.10
#10 902 / 35.5

MADE IN JAPAN

※Length of parallel tip: 50mm (Note: Tip diameter is measured before coating)

Page Top